Fisher & Paykel CI604CTB1 User Manual page 25

5 After a few seconds the display will
then indicate for you to set the left-
hand digit.
When the set time is up
The corresponding indicator in the timer display will flash, the timer will beep, and the
● ●
cooking zone will automatically turn off. (note: if the surface is still hot the display will
H
show ).
Touch any control to stop the beeping.
● ●
Notes on using the timer
Skip the last step (6) if you want to set the timer to less than 10 minutes.
● ●
To modify or cancel a timer setting, follow steps 1 and 2 under 'To set the timer for a
● ●
cooking zone'. The timer display will reset to
00
at to cancel the timer.
You can also cancel a timer by selecting the cooking zone, and decreasing the heat
● ●
0
setting to .
Once you have set the timer for one cooking zone, you can then set it for additional
● ●
cooking zones. Repeat the steps above to set the timer for each additional cooking
zone.
When multiple timers are set:
● ●
The timer display will always revert to showing the setting for the cooking zone with
● ●
the shortest remaining time.
To check the timer setting for a different cooking zone, simply select the cooking
● ●
zone. Its remaining time will briefly appear in the timer display.
USING THE TIMER
6 Set the left-hand digit using the setting
selector. The timer display will flash for
a few seconds and then remain steadily
lit. The timer is now set and begins
counting down.
00
. Adjust the minutes as desired, or leave
23