Adjusting the room temperature
Changing the room temperature for a few hours only
The following functions enable you to change the room temperature for a few hours
without permanently altering your settings.
The modified temperature remains enabled until the next changeover within a pro-
gram or until the next program change.
If you want to raise the room temperature unexpectedly:
■ In programs "Prog 1" to "Prog 3" and "Manual", you can increase the room tem-
perature with V
or
■ In programs "Prog 1" to "Prog 3", you can select party mode with g.
If you want to lower the room temperature unexpectedly:
■ In programs "Prog 1" to "Prog 3" and "Manual", you can decrease the room
temperature with v
or
■ In programs "Prog 1" to "Prog 3" select economy mode with û.
Making changes with keys v/V
1. Press v or V.
The current set temperature will be
displayed.
2. Select the required temperature with
v/V.
Setting party mode
In party mode, the reduced room tem-
perature will be raised automatically to
the selected standard room temperature
("Comfort").
1. Press g for approx. 5 s.
The display shows "Þ".
2. With v/V you can also change the
temperature.
16
3. Confirm with OK or wait approx. 5 s
until the value is adopted automati-
cally.
3. Confirm with OK.
Ending party mode
■ Party mode ends automatically the
next time the heating program
changes over.
■ If you want to terminate party mode
early, press g again for approx. 5 s.