Viessmann VITOTROL 100 Operating Instructions Manual page 14

Adjusting the room temperature
Setting a permanent room temperature
You can select time phases for several
days (day groups) or for individual days:
■ "MO–SU" the same time phases for
every day of the week
■ "MO–FR" the same time phases for
Monday to Friday
■ "SA–SU" the same time phases for
Saturday and Sunday
■ "SINGLE DAY" different time phases
for single days
Note
Settings for individual days take prior-
ity over settings for several days.
01. Open the flap.
02. Press å twice.
03. With v/V select "Settings".
04. Confirm with OK.
05. With v/V select "Programs".
06. Confirm with OK.
07. With v/V select the program you
want to change (e.g. "Prog 1").
08. Confirm with OK.
09. With v/V select "Set".
10. Confirm with OK.
11. With v/V select the required day
group/individual day.
12. Confirm with OK.
14
(cont.)
13. With v/V select the required time
phase or first the required day.
14. With v/V set the required start
time, stop time and the temperature
in that order (e.g."Reduced").
15. Confirm respectively with OK.
16. Proceed as described in points 11 to
13 to set further time phases.
Note
Should gaps be created between
the time phases, these are closed
automatically by an extension to the
previous time phase.
Disabling time phases
Set the same value for start and stop
time to disable a time phase.
Copying time programs
You can copy time programs, for exam-
ple to make a new time program from
another where only minor changes are
required.
01. Open the flap.
02. Press å twice.
03. With v/V select "Settings".
04. Confirm with OK.
05. With v/V select "Programs".
06. Confirm with OK.