Setting A Permanent Room Temperature; Setting An Individual Time Program - Viessmann VITOTROL 100 Operating Instructions Manual

Setting a permanent room temperature

You can select 3 temperatures in the time programs:
■ Standard room temperature "Comfort"
Setting in the delivered condition: 21 °C
Setting range: 10 to 40 °C
■ Room temperature "Eco"
Setting in the delivered condition: 19 °C
Setting range: 10 to 40 °C
■ Reduced room temperature "Reduced"
Setting in the delivered condition: 16 °C
Setting range: 10 to 40 °C
01. Open the flap.
02. Press å twice.
03. With v/V select "Settings".
04. Confirm with OK.
05. With v/V select "Tmp settings".
06. Confirm with OK.
07. Set the required room temperature
for "Comfort" with v/V.

Setting an individual time program

Setting the switching points for the heating periods
In the pre-programmed time programs, the day is split into 6 time phases.
However, you may also split the day in less than 6 time phases, for example:
■ Time phase 1: Operation with standard room temperature from 06:00 to 22:00 h
and
■ Time phase 2: Operation with reduced room temperature from 22:00 to 06:00 h
After entry, the last time phase will automatically be assigned to time phase 6. The
other time phases are then disabled.
For each active time phase, a start time, a stop time and the temperature ("Com-
fort", "Eco", "Reduced") must be entered (see example).
Adjusting the room temperature
08. Confirm with OK.
09. Set the required room temperature
for "Eco" with v/V.
10. Confirm with OK.
11. Set the required room temperature
for "Reduced" with v/V.
12. Confirm with OK.
13