Cleaning Instaclean ™ Fluid Filter; Clean The Gun - Graco GX series Operation, Parts

Cleanup
Cleaning InstaClean
Fluid Filter
(Optional)
The InstaClean Fluid Filter prevents particles
from entering paint hose. After each use,
remove and clean it to ensure peak
performance.
1. Perform Pressure Relief Procedure,
page 13.
2. Disconnect airless spray hose (A) from
sprayer.
3. Unscrew outlet fitting (B).
4. Remove InstaClean Fluid Filter (C).
C
t t i27179a
5. Check InstaClean Fluid Filter (C) for
debris. If needed, clean filter with water
or flushing solvent and a soft brush.
a. Install closed (square) end of
InstaClean Fluid Filter (C) in
sprayer.
b. Screw outlet fitting (B) into sprayer.
6. Tighten outlet fitting and reconnect hose
(A) to sprayer. Use wrench to tighten
securely.
ti27122a
28
™

Clean the Gun

1.
2.
B
A
3.
Clean gun fluid filter with water or
flushing fluid and a brush every time you
flush the system. Replace gun filter if
damaged.
ti27494a
Remove spray tip and tip guard
assembly and clean with water or
flushing fluid and a brush.
ti27152a
Wipe paint off outside of gun using a soft
cloth moistened with water or flushing
fluid.
3A3212C