Graco GX series Operation, Parts page 15

b. Place drain tube in waste pail.
c. Submerge suction tube in a pail
partially filled with water or flushing
fluid.
Hopper Models
a. Lift drain tube with retainer off the
hopper.
b. While holding the drain tube retainer
with drain tube parallel to the top of
a waste pail twist retainer over the
lip of the pail. Drain tube should now
be inside the waste pail.
3A3212C
c.
3. Place Prime/Spray valve in PRIME
position.
ti272 265a
ti27232a
4. Plug power supply cord into a properly
grounded electrical outlet.
ti27268a
Pour approximately two quarts (two
liters) of water or flushing fluid into
the hopper.
Start Up
15