Table of Contents
Advertisement
Description of new and updated functions
Activating/deactivating the FAX port
This section replaces the section „Configuring the system settings - Activating/deactivating
the Fax port (ISDN)" in the user guide for your Gigaset phone.
To register a fax machine/a phone or a doorline to the base, you must activate the
FAX port, i.e. set the port to Telephony / Fax or Doorline mode.
The FAX port is deactivated by default.
When you activate the FAX port, it is regarded as registered. The internal number 8
is assigned to it/the connected device. INT 8 is displayed in the list of internal par-
ties (even if there is no device connected).
¢
Ï Settings
v
¤
You can enter data in the following fields:
Mode:
Telephony / Fax
Activate the FXS port. You can connect a fax machine or an analogue phone to
the FXS port.
You can assign external and internal connections to the FAX port. The first MSN
in the configuration (ISDN) or the analogue fixed line will be assigned to the FAX
port as a send connection automatically. All configured connections of the
phone are assigned to the FAX port as receive connections.
You can change this assignment.
Doorline
Activate the FXS port. You can connect a corded, analogue doorline interface,
working with DTMF codes.
Only internal connections are possible via the FAX port. Neither send nor receive
connections are assigned to it.
Therefore dialling from the doorline device is restricted to * (asterisk) for a col-
lective call and the digits 1-7 for calls to the corresponding internal subscriber.
To enable calls from doorline these digits or "*" should be assigned as DTMF
codes to selected keys of the device during configuration process. Default val-
ues of doorline DTMF codes depend on the selected country.
Doorline calls are shown as regular internal calls.
Off
Deactivate the FAX port. INT 8 will be removed from the internal list. It is no
longer possible to establish a connection to/via FAX port.
To control the doorline device the base station must send different DTMF codes to
the doorline device. When you have selected the Doorline mode, the following
fields are displayed in which you can enter the needed codes (4 characters maxi-
mum, permitted are the digits 0..9 and the special characters "#" , "*").
Door Open Code:
Insert a DTMF code for triggering the door opening mechanism.
Door Connect Code:
Insert a DTMF code for accepting the call and connecting the audio channel.
4
¢
¢
System
FXS Port
Advertisement
Table of Contents
