Table of Contents
Advertisement
Description of new and updated functions
Supplements and corrections to several functions
u
Display during an incoming call with CNIP (country-specific):
If the number of the caller is stored in your directory, the caller's number (not the
CNIP information) is replaced by the corresponding directory entry.
Both, CNIP and directory name replacement may be shown together.
u
Making calls using network services (country-/provider-specific):
– For some functions, you must press the softkey
submit changes.
– Cancelling ringback :
To cancel ringback early select v
§OK§
u
Using Bluetooth devices:
Adding the data device/mobile phone to the known devices list:
If the new device fails to register, the list of known devices will only remain
unchanged if no device was selected to be replaced.
Connecting headsets:
You can connect a wire-bound headset and a Bluetooth headset to the base at
the same time. In this case you cannot use a function key with the wire-bound
headset.
u
Function/display key assignments:
Additionally to the listed functions in the user manual you can assign the SMS
menu to a function key for a quick access:
¤
Press and hold a function/display key.
¤
Select More Functions... and press
¤
Select SMS and press
u
Activating the screensaver Info Services:
For using the Info Services screensaver you do not have to activate the display
of info services via the Web configurator any longer as a prerequisite.
Depending on the information feed selected for the screensaver, a display key
appears on the right (e.g.,
display, proceed as follows:
¤
Press and hold the red end key T.
¤
Start dialling ~.
u
Changing the ISDN connection
If your base had already been connected to ISDN and you want to change the
ISDN connection (new MSNs), you have manually to delete till now saved MSNs
on the base. Please do the following:
¤
Start the ISDN wizard via the menu :
v
¤
Delete the MSNs saved on the base.
¤
Finish the ISDN wizard.
¤
Restart the ISDN wizard via the menu and start the automatic MSN assign-
ment.
14
. Ringback is cancelled. You do not need to press any other key.
§OK§
§More§
¢
¢
Ï Settings
ISDN Wizard
¢
Ç Select Services
§OK§
.
.
) for calling up further functions. To return to idle
§Send§
§OK§
instead of
or
¢
Ringback Off
§Save§
to
Advertisement
Table of Contents
