Setting The Time And Using The Timer; Setting The Current Time - Samsung js9800 E-Manual

Setting the Time and Using the Timer

Setting the Current Time

MENU
(MENU/123)
Set the clock manually or automatically. Once the clock has been set, you can select the
on virtual remote control to check the current time.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU
(MENU/123)
Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel.
Set
To enable this option, the TV's Antenna jack must be connected to either an antenna or a cable
output and must be receiving digital broadcasts. The accuracy of the time information received may
vary depending on the channel and signal. If your TV is connected to a set-top-box using HDMI or
Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode
MENU
(MENU/123)
If the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as
-/+ 12 hours. Select
"
Time Offset
adjusts the time through network connections and is only available if the
and the TV is connected to the Internet though a local area network.
"
Time Offset
will adjust the time if the TV fails to receive time information through normal digital broadcast
signals.
Setting the Clock Manually
MENU
(MENU/123)
Manually enter the time. Set
time and date.
Clock Set: Set the current
System Time
System Time
System Time
System Time Clock
System Time
Clock Mode
Date and Time.
Clock
Try Now
Clock Clock Mode
Clock Time Offset
Time Offset
and offset the clock to the correct time.
Clock Clock Set
Try Now
Manual
to and then select
Try Now
Try Now
Clock
Clock Set
to enter the current
INFO
button
Auto
is set to