Pairing Samsung Smart Control; Reconnecting Samsung Smart Control - Samsung js9800 E-Manual

Pairing Samsung Smart Control

To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via
Bluetooth.
"
Samsung Smart Control can only be paired to a single TV.
1.
Point Samsung Smart Control at the remote control sensor of the TV and press the
turn the TV on.
"
Remote control receiver's location may vary depending on the model.
2.
The Bluetooth icon will appear on the screen as shown below. The TV will then attempt to
connect to the Samsung Smart Control unit automatically.
"
Actual menu screen may differ depending on the TV model.

Reconnecting Samsung Smart Control

If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may
be due to insufficient battery power.
If the problem persists, the Samsung Smart Control restore pairing with the TV.
1.
RETURN
Press
"
You must place the Samsung Smart Control approximately 30cm ~ 40cm away from the TV and ensure
it is pointing towards the remote control receiver.
2.
Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to
TV automatically.
"
Actual menu screen may differ depending on the TV model.
<Connection attempt and completion icons>
EXTRA
button and button simultaneously for 3 seconds.
button to