Base Models - HP Integrity BL890c i2 Quickspecs

QuickSpecs
Models

Base Models

HP Integrity BL890c i2
Base Unit for c7000
Enclosure
AH384A
HP Integrity BL890c i2
Base Unit for c3000
Enclosure
AM330A
Processor(s)
Supports up to eight (8)
processors
Cache Memory
All processor models
Memory
Network Adapter
Storage Controller
Hard Drives
IO expansion
Optical Drive
Integrity iLO 3
Form Factor
c04111605 — DA – 13619 Worldwide — Version 24 — June 01, 2015
Eight (8) processor sockets, processor modules are configured to order
Included with processor
Ninety six (96) DIMM sockets; memory DIMMs are configured to order
Four (4) NIC ports via (2) NC532i Dual Port Flex-1010GbE Multifunction
Server Adapter
NOTE: Flex-10 capability requires OS drivers and the use of an HP Virtual
Connect Flex-10 10GbE Ethernet module. Learn more at:
www.hp.com/go/virtualconnect
NOTE: BL8x0c i2 server blades require Virtual Connect 3.00 or later when
used in Virtual Connect configurations
NOTE: Each part is autosensing 1Gb/10Gb, and can interoperate with 1Gb
HP BladeSystem c-Class interconnect components.
One (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Integrated HP Smart Array p410i SAS Controller
Eight SFF SAS drive bays; hard disk drives are configured to order
Twelve (12) PCIe Mezzanine card slots (PCIe Gen2 x8 interface); mezzanine
cards are configured to order
None internal to blade server
Integrity iLO 3 and Integrity iLO 3 Advanced Pack license included
Supports 1 BL890c i2 in HP BladeSystem c3000 Enclosure
Supports up to 2 BL890c i2 in HP BladeSystem c7000 Enclosure
HP Integrity BL890c i2 Server Blade
Page 18