Table of Contents
Advertisement
2
Figure 46
1. Main-30 amp
4. Return the control panel to its original position. Use
the screws removed previously to secure the panel
to the machine.
1
G014921
2. Charge circuit-25 amp
Drive System
Maintenance
Checking the Tire Pressure
Service Interval: Every 25 hours—Check tire pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven cut.
Check the pressure at the valve stem (Figure 47). Check
the tires when they are cold to get the most accurate
pressure reading.
Refer to the maximum pressure suggested by the tire
manufacturer on the sidewall of the caster wheel tires.
Inflate the rear drive wheel tires to 12 psi.
1. Valve stem
Releasing the Electric Brake
The electric brake can be release by manually rotating the
link arms forward. Once the electric brake is energized
the brake will reset.
To release the brake:
1. Brake link arm on the electric brake control module
38
Figure 47
1
G015000
Figure 48
Hide quick links:
Advertisement
Table of Contents
