Engine Maintenance; Servicing The Air Cleaner - Toro 74386 Operator's Manual

4. Connect a grease gun to each fitting (Figure 32 and
Figure 33). Pump grease into the fittings until grease
begins to ooze out of the bearings.
5. Wipe up any excess grease.

Engine Maintenance

Servicing the Air Cleaner

Note: Service the air cleaner more frequently (every
few hours) if operating conditions are extremely dusty
or sandy.
Removing the Element
1. Park the machine on a level surface and disengage
the blade control (PTO).
2. Move the motion control levers to the brake position,
stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Clean around the air cleaner cover to prevent dirt
from getting into the engine and causing damage.
Lift the cover and remove the hose clamp securing
the air cleaner assembly to the engine (Figure 34).
4. Loosen the hose clamp and remove the paper
element (Figure 34).
2
3
1. Cover
2. Paper element
Cleaning the Element
Service Interval: Every 100 hours—Service the paper
element. (more often in dusty, dirty
conditions)
Every 200 hours/Yearly (whichever
comes first)—Replace the paper
element. (more often in dusty, dirty
conditions)
31
1
G014908
Figure 34
3. Hose clamp