Table of Contents
Advertisement
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
This product complies with all relevant European directives.
For details, please see the Declaration of Incorporation (DOI)
at the back of this publication.
This reel-blade lawnmower is mounted to a ride-on machine
and is intended to be used by professional, hired operators in
commercial applications. It is primarily designed for cutting
grass on well-maintained lawns in parks, golf courses, sports
fields, and on commercial grounds. It is not designed for
cutting brush, mowing grass and other growth alongside
highways, or for agricultural uses.
Introduction
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready.
Figure 1
model and serial numbers on the product. Write the numbers
in the space provided.
1. Location of the model and serial numbers
© 2015-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
identifies the location of the
Figure 1
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
Safety and Instructional Decals ................................. 3
Setup ............................................................................ 4
1 Inspecting the Cutting Unit .................................... 4
2 Cutting Unit Kickstand .......................................... 4
3 Adjusting the Rear Shield ....................................... 4
4 Installing the Loose Parts ....................................... 5
Product Overview .......................................................... 7
Specifications ......................................................... 7
catalog for part numbers) ...................................... 7
Operation ..................................................................... 8
Making Adjustments................................................ 8
Height-of-Cut Chart Terms .....................................10
Height-of-Cut Chart ...............................................11
Servicing the Bedknife ............................................15
Maintenance .................................................................16
Lubrication............................................................16
Servicing the Bedbar ...............................................16
Servicing the Roller.................................................18
2
(Figure
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
2),
Advertisement
Table of Contents
