Toro 03634 Operator's Manual page 22

The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
03634 315000001 and Up
03695 315000001 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
David Klis
Sr. Engineering Manager
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
May 29, 2012
Declaration of Incorporation
Product Description
8-Blade DPA Cutting Unit
with 5in Reel, Reelmaster
5010-H/5210/5410 Series
Traction Unit
11-Blade DPA Cutting Unit
with 5in Reel, Reelmaster
5010-H/5210/5410 Series
Traction Unit
Invoice Description
22IN 5-IN 8-BLD DPA CU
[5010 HYBRID]
22IN 5-IN 11-BLD DPA CU
[5010 HYBRID]
22
General Description
Cutting Unit
Cutting Unit
EU Technical Contact:
Peter Tetteroo
Toro Europe NV
B-2260 Oevel-Westerloo
Belgium
Tel. 0032 14 562960
Fax 0032 14 581911
Directive
2006/42/EC
2006/42/EC