Testing The Pressure In The Hydraulic System - Toro 03674 Operator's Manual

Testing the Pressure in the
Hydraulic System
Use the hydraulic system test ports to test the pressure in
the hydraulic circuits. Contact your Toro Distributor for
assistance.
Use the test ports on the front hydraulic tubes
assist in troubleshooting the traction circuit.
1. Traction-circuit test port
Use the test port on the gear pump
troubleshooting the lift circuit.
1
g027139
1. Lift-circuit test port
(Figure
Figure 77
(Figure 78) to assist in
2
Figure 78
2. Charge-pressure circuit
Use the test port on the hydraulic tube
troubleshooting the charge-pressure circuit.
77) to
52
(Figure 78) to assist in