Table of Contents
Advertisement
About
Menu Item
Model
SN
Machine Controller Revision
CU 1
CU 2
CU 3
CU 4
CU 5
Generator
InfoCenter Revision
CAN Bus
Protected Menus
There are 2 additional display screens and 7 operating
configuration settings that are adjustable within the Settings
Menu of the InfoCenter: Auto Idle, Blade Count, Mow
Speed, Height of Cut (HOC), F Reel RPM, R Reel RPM, and
Economy Mode. These settings can be locked by using the
Protected Menu.
Note: At the time of delivery, the initial password code is
programmed by your distributor.
Accessing the Protected Menu Settings
and Display Screens
To access the Protected Menu Settings and Display Screens
1. From the Main Menu, scroll down to the Settings
Menu and press the right button.
2. In the Settings Menu, scroll down to the Protected
Menu and press the right button.
3. To enter the passcode, use the center button to set
the first digit then press the right button to move on
to the next digit.
4. Use the center button to set the second digit then press
the right button to move on to the next digit.
5. Use the center button to set the third digit then press
the right button to move on to the next digit.
6. Use the center button to set the fourth digit then press
the right button.
7. Press the middle button to enter the code.
8. If the code has been accepted and the protected menu
has been unlocked, "PIN" is be displayed in the upper
right corner of the display screen.
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.
Lists the software revision of
each cutting unit.
Lists the software revision of
the motor/generator.
Lists the software revision of
the InfoCenter.
Lists the machine
communication bus status.
Note: If the passcode has been forgotten or misplaced,
please contact your distributor for assistance.
Viewing and Changing the Protected
Menu Settings
1. In the Protected Menu, scroll down to Protect Settings.
2. To view and change the settings without entering a
passcode, use the right button to change the Protect
Settings to O
.
FF
3. To view and change the settings with a passcode, use
the left button to change the Protect Settings to O
set the passcode, and turn the key in the ignition switch
to the O
position and then to the O
FF
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle time
between O
, 8S, 10S, 15S, 20S, and 30S.
FF
Setting the Blade Count
1. In the Settings Menu, scroll down to Blade Count
2. Press the right button to change the blade count
between 5, 8 or 11 blade reels.
Setting the Mow Speed
1. In the Settings Menu, scroll down to Mow Speed.
2. Press the right button to select Mow Speed.
3. Use the center and right button to select the appropriate
mow speed set on the mechanical mow-speed limiter
on the traction pedal.
4. Press the left button to exit mow speed and save the
setting.
Setting the Height of Cut (HOC)
1. In the Settings Menu, scroll down to HOC.
2. Press the right button to select HOC.
3. Use the center and right button to select the appropriate
HOC setting. (If the exact setting is not displayed,
select the nearest HOC setting from the list displayed).
4. Press the left button to exit HOC and save the setting.
23
,
N
position.
N
Advertisement
Table of Contents
