Safety; Safe Operating Practices - Toro 03674 Operator's Manual

Safety

This machine is designed in accordance with EN ISO
5395:2013 and ANSI B71.4-2012 specifications in effect at
time of production.
Improper use or maintenance by the operator or
owner can result in injury. To reduce the potential
for injury, comply with these safety instructions and
always pay attention to the safety-alert symbol, which
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with the instruction may
result in personal injury or death.

Safe Operating Practices

Training
•
Read the Operator's Manual and other training material
carefully. Be familiar with the controls, safety signs, and
the proper use of the equipment.
•
Never allow children or people unfamiliar with these
instructions to use or service the mower. Local
regulations may restrict the age of the operator.
•
Never mow while people, especially children, or pets are
nearby.
•
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
•
Do not carry passengers.
•
All drivers and mechanics should seek and obtain
professional and practical instruction. The owner is
responsible for training the users. Such instruction should
emphasize the need for care and concentration when
working with ride-on machines.
•
The owner/user can prevent and is responsible for
accidents or injuries occurring to people or damage to
property.
Preparation
•
While mowing, always wear substantial, slip-resistant
footwear, long trousers, safety glasses, and ear protection.
Tie long hair back. Do not wear jewelry.
•
Thoroughly inspect the area where the equipment is to
be used and remove all objects which may be thrown by
the machine.
•
Replace faulty silencers/mufflers.
•
Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Use only accessories and attachments approved
by the manufacturer.
•
Check that the operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate unless they are functioning
properly.
Safe Handling of Fuels
•
To avoid personal injury or property damage, use extreme
care in handling fuel. Fuel is extremely flammable and the
vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other sources
of ignition.
•
Use only an approved fuel container.
•
Never remove the fuel cap or add fuel with the engine
running.
•
Allow the engine to cool before refueling.
•
Never refuel the machine indoors.
•
Never store the machine or fuel container where there is
an open flame, spark, or pilot light, such as on a water
heater or on other appliances.
•
Never fill containers inside a vehicle or on a truck or
trailer bed with a plastic liner. Always place containers on
the ground away from your vehicle before filling.
•
Remove equipment from the truck or trailer and refuel it
on the ground. If this is not possible, then refuel such
equipment with a portable container rather than from a
fuel-dispenser nozzle.
•
Keep the nozzle in contact with the rim of the fuel tank
or container opening at all times until fueling is complete.
Do not use a nozzle lock-open device.
•
If fuel is spilled on your clothing, change your clothing
immediately.
•
Never overfill the fuel tank. Replace the fuel cap and
tighten it securely.
Operation
•
Do not operate the engine in a confined space where
dangerous carbon monoxide and other exhaust gasses
can collect.
•
Mow only in daylight or in good artificial light.
•
Before attempting to start the engine, disengage all
blade-attachment clutches, shift into neutral, and engage
the parking brake.
•
Use counterweight(s) or wheel weights when suggested in
the Operator's Manual.
•
Stay alert for holes in the terrain and other hidden hazards.
•
Watch out for traffic when crossing or near roadways.
•
Stop the blades rotating before crossing surfaces other
than grass.
•
When using any attachments, never direct discharge of
material toward bystanders nor allow anyone near the
machine while in operation.
•
Never operate the machine with damaged guards, shields,
or without safety protective devices in place. Be sure
that all interlocks are attached, adjusted properly, and
functioning properly.
4