Toro 03674 Operator's Manual page 24

Setting the Front and Rear Reel Speeds
Although the front and rear reel speeds are calculated by
inputting the number of blades, mow speed and HOC into
the InfoCenter, the setting can be manually changed to
accommodate for different mowing conditions.
1. To change the Reel Speed Settings, scroll down to the
F Reel RPM, R Reel RPM, or both.
2. Press the right button to change the reel speed value.
As the speed setting is changed, the display continues
to show the calculated reel speed based on blade count,
mow speed and HOC which was previously entered,
but the new value also is displayed.
Setting the Economy Mode
1. From the Main Menu, use the center button to scroll
down to the Settings Menu.
2. Press the right button to select.
3. In the Settings Menu, use the center button to scroll
down to the Economy Mode.
4. Press the right button to select the O
5. Press the left button to save the setting and exit the
settings.
To Access Protected Display Screens
From the main screen, press the center button once, when
the arrows appear above the buttons, press the center button
again to scroll through the display screens.
Press the center button again to access the eReel information
screen displaying the reel current and the speed for each of
the 5 cutting units.
Press the center button again to access the energy mode
screen displaying the components, energy flow and the
direction while in operation.
function.
N
24