9
6 cooking programs and a manual mode
Select this cooking program if you want
to cook burgers.
Select this cooking program if you want
to cook poultry.
Select this cooking program if you want
to cook a sandwich.
Select this cooking program if you want
to cook pork/sausage/lamb.
If you are uncertain about what cooking mode to use for other foods because it is not listed above,
please refer to the "Cooking table for Non-program foods" page 15.
11
13
8
10
4-7
minutes
12
9 If the food that you wish to cook is
frozen, press the "frozen food" button.
10 Select the appropriate cooking
mode according to what type of food
you wish to cook.
Select this cooking program if you want
to cook red meat.
Select this cooking program if you want
to cook fish.
If you select Manual mode the indicator
light is white and you have manual control
of the cooking time.
11 Press the "OK" button: the appliance
starts pre-heating and the cooking
level indicator flashes purple.
Note: If you have selected the wrong
program, return to stage 8.
12 Wait for 4-7 minutes.
13 An audible tone is heard and the
cooking level indicator stops flashing
purple the pre-heating mode is
complete.
Comments: At the end of pre-heating,
if the appliance remains closed,
the safety system will turn off the
appliance.
Need help?
Do you have a question about the OPTIGRILL and is the answer not in the manual?
Questions and answers
When I push the chicken or any other choice - then the OK button comes on - and the big circle doesn't light up - when I push the OK button - it goes to manual.
@Pat A Hudson
The T-Fal OptiGrill may not light up the big circle when selecting chicken and pressing the OK button due to one of the following reasons:
1. The appliance was not properly preheated before starting the cooking cycle. In this case, the grill may switch to manual mode (white LED) instead of auto cooking mode. To fix this, close the appliance properly, reselect the program, press OK, and wait until preheating is complete.
2. The appliance did not detect the food properly. For thin pieces of food, the OK button must be pressed when the indicator is fixed purple to start the cooking cycle.
3. There could be an appliance failure. If proper steps do not work after several attempts, contact T-Fal Customer Service.
These issues can prevent the grill from entering auto cooking mode and lighting up the big circle.
This answer is automatically generated