4
Comments
22
24
23
25
- Then wait for the pre-heating to
be complete before opening the
grill and place the food inside.
Note: if the new pre-heating
cycle is carried out immediately
after the end of the preceding
cycle, the pre-heating time will be
reduced.
22-23-24
Cook the food according to
your personal taste (except for
cooking food under 4 mm thick
where the cooking cycle has
been started by pressing 'OK').
If you want to cook food to
different personal tastes, once
you have placed it on the grill,
open the lid and remove the food
when it has reached the desired
level and then close the grill and
continue cooking the other food.
The program will continue its
cooking cycle until it reaches the
'well done' level.
25 Keep warm function
When the cooking process
has ended the appliance will
automatically go on the keep
warm setting and the cooking
level indicator will automatically
go red and an audible tone will
sound every 20 seconds. If food
is left on the grill it will continue
to cook, while the cooking plates
are cooling. You can stop the
audible tone by pressing the "OK"
button.
Comment: the safety system
will turn the appliance off
automatically after a certain
amount of time.
Second cooking
If you want to cook more food,
please refere to section 21.
11
Need help?
Do you have a question about the OPTIGRILL and is the answer not in the manual?
Questions and answers
When I push the chicken or any other choice - then the OK button comes on - and the big circle doesn't light up - when I push the OK button - it goes to manual.
@Pat A Hudson
The T-Fal OptiGrill may not light up the big circle when selecting chicken and pressing the OK button due to one of the following reasons:
1. The appliance was not properly preheated before starting the cooking cycle. In this case, the grill may switch to manual mode (white LED) instead of auto cooking mode. To fix this, close the appliance properly, reselect the program, press OK, and wait until preheating is complete.
2. The appliance did not detect the food properly. For thin pieces of food, the OK button must be pressed when the indicator is fixed purple to start the cooking cycle.
3. There could be an appliance failure. If proper steps do not work after several attempts, contact T-Fal Customer Service.
These issues can prevent the grill from entering auto cooking mode and lighting up the big circle.
This answer is automatically generated