Sound Pressure; Sound Power; Vibration - Toro 08759 Operator's Manual

• Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or assistance is desired, contact an
Authorized Toro Distributor.
• To reduce a potential fire hazard, keep the
engine free of excessive grease, grass, leaves,
and accumulations of dirt. Never wash a warm
engine or any electrical parts with water.
• Be sure that the machine is in safe operating
condition by keeping nuts, bolts, and screws
tight. Check the fan shaft bearing mounting
bolts and nuts frequently to be sure that they
are tightened to specification.
• Make sure that all hydraulic line connectors are
tight and all hydraulic hoses and lines are in
good condition before applying pressure to the
system.
• Keep your body and hands away from pin hole
leaks in hydraulic lines that eject high pressure
hydraulic fluid. Use cardboard or paper to find
hydraulic leaks. Hydraulic fluid escaping under
pressure can penetrate skin and cause injury.
Fluid accidentally injected into the skin must
be surgically removed within a few hours by
a doctor familiar with this form of injury or
gangrene may result.
• Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved by stopping the engine
and lowering the blower to the ground.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet,
clothing, and other parts of the body away
from the fan and other moving parts.
• Do not overspeed the engine by changing the
governor settings. To be sure of safety and
accuracy, have an Authorized Toro Distributor
check the maximum engine speed with a
tachometer.
• The engine must be shut off before checking
the oil or adding oil to the crankcase.
• To ensure optimum performance and safety,
always purchase genuine Toro replacement
parts and accessories to keep the machine
all Toro. Never use "will-fit" replacement
parts and accessories made by other
manufacturers. Look for the Toro logo
to ensure genuineness. Using unapproved
replacement parts and accessories could void
the warranty.

Sound Pressure

This unit has an equivalent continuous A-weighted
sound pressure level at the operator ear of 92 dBA,
based on measurements of identical machines per
EN 11094 and EN 836

Sound Power

This unit has a guaranteed sound power level of
108 dBA, based on measurements of identical
machines per EN 11094.

Vibration

This unit does not exceed a hand/arm vibration
level of 2.50 m/s 2 , based on measurements
of identical machines per EN 1033. This unit
does not exceed a whole body vibration level of
0.50 m/s 2 , based on measurements of identical
machines per EN 1032.
4