Table of Contents
Advertisement
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Figure 1
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
Figure 2
1. Safety alert symbol
© 2006-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
This manual uses 2 other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes general
information worthy of special attention.
Contents
Introduction ......................................................... 2
Safety .................................................................. 3
Before Operating ........................................... 3
While Operating............................................. 3
Maintenance .................................................. 3
Sound Pressure .............................................. 4
Sound Power ................................................. 4
Vibration....................................................... 4
Safety and Instructional Decals ........................ 5
Setup ................................................................... 6
2 Adjusting the Link Assembly ......................... 7
3 Grease the Blower........................................ 7
4 Finishing the Setup....................................... 7
Operation ............................................................ 8
Adjust Discharge Opening............................... 8
Operating Tips............................................... 8
Maintenance ......................................................... 9
Lubrication.................................................... 9
Bearing Alignment.......................................... 9
Torquing Fasteners ....................................... 10
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
Advertisement
Table of Contents
