D-Link DIR-320 User Manual page 93

DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Figure 72. The page for creating a new IPv6 PPPoE connection. The PPP section.
Parameter
Username
Without authorization
Password
Password confirmation
Service name
Authentication
algorithm
MTU
Keep Alive
Dial on demand
PPP IP extension
PPP
A username (login) to access the Internet.
Select the checkbox if you don't need to enter a username and
password to access the Internet.
A password to access the Internet.
The confirmation of the entered password (to avoid mistypes).
The name of the PPPoE authentication server.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the Maximum idle time field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Page 93 of 220
Configuring via Web-based Interface
Description
keep you connected to