DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Flow Control
On the Advanced / Flow Control page, you can enable and disable data flow control for the
WAN port of the router.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
To enable the flow control function, select the Enabled checkbox and click the Apply button.
To disable the flow control function, deselect the Enabled checkbox and click the Apply button.
Figure 135. The Advanced / Flow Control page.
Page 171 of 220
Configuring via Web-based Interface