DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection
To create a connection of the IPv6 PPPoE or PPPoE Dual Stack type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 70. The page for creating a new IPv6 PPPoE connection. The General settings section.
Parameter
Provider
Interface
Name
Enable
Direction
General settings
Leave the Manually value.
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 91 of 220
Configuring via Web-based Interface
Description