provider, you should contact them or refer to
Settings
for a list of many wireless service providers' settings. You may also want to
refer to
http://www.zoomtel.com/mbsettings
•
LAN IP Address
This is the LAN IP Address of your router. Devices behind your router use
this address as their default gateway. Most users will not need to change
this address.
•
APN
This is the Access Point Name (APN) assigned by your service provider, if
needed.
•
PIN
This is the Personal Identification Number (PIN) code assigned by your
service provider, if needed.
•
Dialed Number
This number is assigned by your service provider, if needed.
•
Account
This is the Account Name provided by your service provider, if needed.
•
Password
This is the Password assigned by your service provider, if needed.
Go to
Step 4. Wireless
Step 4. Wireless Settings
The Wireless Settings page lets you change the wireless settings for your Travel Router.
If you are happy with your wireless settings (set at the factory to wireless without
security), click Next to go to Step 5. Otherwise, continue below. EITHER WAY, after
running the Setup Wizard you will need to make sure that wireless devices
connecting to the Travel Router (computers, phones, tablets, game stations, etc.) are
set up properly as discussed in
22
Appendix A: Mobile Broadband
Settings.
Chapter
3.
Travel Router with Wireless-N User Manual