Motorola APX 6000XE User Manual page 85

Enabling Transmit Inhibition
Press the Transmit Inhibit programmable button.
Note: If the user has disabled TX Inhibit via the
menu and then moves the switch to the position
where TX Inhibit is enabled, the new value
overwrites the menu value.
The display shows Tx inhibit on. You hear a
sequence of short, low‐high tones to indicate
transmission is inhibited.
Pressing PTT triggers the radio sounds a constant
short, low‐pitched tone (reject tone).
Note: The status of the Transmit Inhibit does not
change after the radio powers up.
Disabling Transmit Inhibition
Press the Transmit Inhibit programmable button.
Note: If the user has disabled TX Inhibit via the
softkey and then moves the switch to the position
where TX Inhibit is enabled, the new value
overwrites the menu value.
The display shows Tx inhibit off. You hear a
sequence of short, high‐low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal
operation.
81
English