York YAWS018 - 075 Installation Manual page 27

The Aurora Base Control System cont.
Service Device
Aurora Interface and Diagnostics
(AID) Tool
Add On Control Feature Kits
(field or factory installed)
Geo Energy Monitoring Kit
Refrigeration Monitoring Kit
Performance Monitoring Kit
Data Logging (AWL) Kit
HAN/Smart Grid Com
(AWL and Portal) Kit
AXB Kit for advanced hot water
generator control, flow center
linking, variable speed pump
Add On Thermostats and Zoning
HydroStat
HZO
HZC
Description
Allows setup, monitoring and troubleshooting of any
Aurora Control.
NOTE: Although the ABC has basic compatibility with all
Aurora, new product features may not be available on older
AID Tools. To simplify the basic compatibility ensure the
version of AID is at least the same or greater than the ABC
software version.
Description
Monitors realtime power consumption of compressor, aux
heat and pump. AXB required.
Monitors realtime pressures, temperatures, superheat, and
subcooling. AXB required.
Monitors water temperatures and water flow rate and
calculates heat of extraction/rejection. AXB required.
Allows data logging of up to 12 months. AXB required. Can
also be temporarily installed for troubleshooting.
Allows direct communication of the Aurora to Smart Meters,
HAN, and internet. AXB required.
Added to 5 Series for key features of advanced hot water
generator control and advanced loop control/linking.
Description
Communicating controller for one hydronic heat pump.
Non-communicating controller for up to four heat pumps.
Non-communicating controller for one hydronic heat pump
AFFINITY SINGLE STAGE HYDRONIC INSTALLATION MANUAL
27
Aurora 'Base' Aurora 'Advanced'
For Service For Service
(Ver. 1.xx or greater) (Ver. 2.xx or greater)
Aurora 'Base' Aurora 'Advanced'
- Standard
- Optional Sensor Kit
- Optional Sensor Kit
- Optional
- Optional
Optional
Standard
(Field Kit)
Aurora 'Base' Aurora 'Advanced'
Optional Optional
Optional Optional
Optional Optional