Advertisement
Generally, an a/c power cord is required for products to have a backlight.
This clock does not use a/c power cord.
Manual Set Time
There are two function keys located on the reverse of the unit: SET and +
(PLUS). To begin hold the SET button until the display flashes. Press and release
the PLUS button to change a value. When you press and release the SET button
after each step, you will be moved to the next step.
HOUR: The Hour will flash. Use the PLUS button to set the Hour. Be sure to
1.
set the Hour for AM or PM. Press and release the SET button once.
MINUTES: The Minutes will flash. Use the PLUS button to set the Minutes.
2.
Press and release the SET Button once.
SOLAR MODE: SOL will show with either ON or OFF flashing. The Solar Mode is
3.
used for saving the power consumption of the rechargeable battery (Default
setting ON).
Press the PLUS button to switch between ON or OFF. Press and release the SET
4.
button once.
Note: If the solar mode setting is ON:
LCD will automatically turn OFF if the environment is too dark
LCD will automatically turn ON if the environment is bright enough;
the surrounding environment brightness is checked every 5 seconds
No information will be displayed when the LCD is OFF, but all the settings and
operations will remain, except for the temperature and humidity measurements.
If the solar mode setting is OFF:
LCD will remain ON constantly.
Solar Mode in the Program Menu is not related to the batteries.
Clock goes blank in low light
SOLAR MODE: The Solar Mode is used for saving power consumption of the
rechargeable battery (Default setting ON). The display will go blank in low light.
This is a setting in the program menu that can be turned OFF.
When the solar mode setting is ON:
The surrounding environment brightness is checked every 5 seconds.
•
LCD will automatically turn OFF if the environment is too dark.
•
LCD will automatically turn ON if the environment is bright enough.
•
No information will be displayed when the LCD is OFF, but all the settings and
•
operations will remain, except for the temperature and humidity measurements.
When the solar mode setting is OFF:
LCD will remain ON constantly.
•
TURN OFF: scroll through your program menu until you see SOL ON. Press and
release the PLUS button to change that to OFF.
La Crosse Technology, Ltd.
Page 6
Advertisement
