Download Print this page

Amana ARR6220 Owner's Manual page 11

Advertisement

Self-clean feature uses high oven temperature to clean oven interior. For
the oven to operate through a complete self-clean cycle, the self-clean
must be set when the oven is cool.
1. Prepare oven for self-cleaning (see below right).
2. With door closed, move oven
door lever, located above
oven door, to the right. This
moves the lever to the
LOCKED position.
3. Turn oven temperature knob
to CLEAN position.
• If oven temperature knob is
set before oven door lever
is moved, LOCKED light
flashes. Move oven door
lever to locked position.
• Once cycle begins, both LOCKED and OVEN indicator lights will
be on and remain on until the end of the cycle.
• At the end of self-clean cycle, OVEN and LOCKED indicator
lights flash. This indicates the oven is cool enough for the door to
be unlocked. Oven cavity may still be hot to the touch. Turn
temperature knob to OFF position and move oven door lever to
unlocked position. DO NOT attempt to unlock door prior to OVEN
and LOCKED indicator lights flashing.
To stop a self-clean cycle that has
already started follow these steps. If the
interruption occurs mid cycle, the oven
will remain locked, even though the
cycle has been stopped, until the oven
cavity has cooled to a safe temperature.
1.
Turn oven temperature knob to OFF
position.
2.
When oven has cooled to a safe
temperature, LOCKED light flashes.
Door will unlock and can be
opened. DO NOT force lock or door.
This can cause damage to the latch.
OFF
OVEN
BROIL
CLEAN
LOCKED
550
PREHEATED
500
450
The self-clean cycle lasts a total of four
hours with a 1/2 hour cool down. After
the self-clean cycle ends, the oven
must cool before the oven door can be
opened. When the LOCKED light no
longer glows you can safely open the
oven door. DO NOT force the oven lock
or door open while the LOCKED light
shows. The oven door lock can be
damaged.
To avoid fire or smoke damage,
• remove any flammable materials
from storage drawer. Items like
plastic containers and paper
manuals can melt or burn.
WM
• clean excess spills before
starting Self Clean.
200
250
300
350
400
To avoid risk of personal injury, do
not touch oven vents, or area
around vents, during self-
cleaning. These areas can
become hot enough to cause
burns.
To get the best results from the
self-clean cycle, follow these steps:
Clean excess spills from oven
interior.
Remove birds or animals
susceptible to smoke or other
fumes from the room or adjoining
room.
Make sure oven light cover is
properly in place. Do not use
cleaning cycle if it is not.
Remove oven racks and all
cooking utensils from oven.
Remove items from range top and
backguard. These areas can become
hot during self-cleaning cycle.
The range vents from the right rear
element. Make sure this is
unobstructed by removing all items
from range top.
!
CAUTION
!
WARNING

Advertisement

loading