Material Preparation - WAGNER motocoat Owner's Manual

For more details regarding which materials
can be sprayed by this equipment, go to:
www.wagnerspraytech.com
note: Only thin the material if absolutely necessary to
improve spray performance (or if advised by coating
manufactuer). Optimal spray performance should be
acheived simply by adjusting the various controls on
the unit.
To Prepare the Material
note: Follow your material manufacturer's guidelines
on material preparation.
1. Stir or mix the spraying material thoroughly
(using the mixer installed into a cordless drill is
recommended).
2. Unscrew the cup from the nozzle.
3. After the material has been properly thinned and
strained, fill the container to desired level.
© Wagner Spray Tech. - All Rights Reserved

Material Preparation

STOP
1
2
3
English
5