Accessing The Function Mode - Spektrum DX2.0 User Manual

Accessing
the Function
Mode
18
Next, press the SCROLL key until a beep is heard. The display will change to show the
first function listed on the Function Mode flow chart as shown below. Press the SCROLL
key to scroll down through the functions one by one, as shown in the flow chart. Once the
desired function has been reached, use the CHANNEL key to select the appropriate channel
(if applicable). To adjust the values of the function, simply press the INCREASE (+) or
DECREASE (-) keys until the desired value is displayed on the screen. To exit function
mode, press the SCROLL and CHANNEL keys at the same time. The next time you enter
Function mode, you will be returned to the last function accessed.
The End-Point Adjustment feature of the DX2.0 allows the maximum travel of both the
st
E P A
I00
L / F
stS
TRI M
0
st
–
REV • NORM
Channel
Key
E P A
R/B
Channel
Key
T R IM
Channel
Key
SB -T R M
tH
End-Point
Adjustment
(page 19)
I00
tHS
Sub-Trim
(page 20)
0
st
Servo
Reversing
(page 21)
–
REV • NORM