Table of Contents
Advertisement
FUNCTIONS
Sequential pan function
You can set the camera to move sequentially to the 6 preset
camera positions memorised in numbers 1 to 6.
•
Before this function can be used, the 6 sequential pan
positions (No. 1 to 6) must be preset.
When the sequential pan function is started
1
The camera will move from its actual position to the home
position (No. 1).
No.1
2
The camera will move from the home position (No. 1) to
preset position No. 2.
No.2
No.1
3
The camera will then move sequentially to positions No. 3,
No. 4, No. 5 and No. 6.
Preset position No. 2
Preset position No. 6
Preset position No. 1
Preset position No. 1
Preset position No. 2
Preset position No. 3
Preset position No. 4
Preset position No. 5
4
The camera will move back from position No. 6 to the home
position (No. 1).
No.1
5
Steps 2 to 4 are repeated.
Iris function
The camera iris level can be adjusted.
15 different iris levels can be set.
One-push (AWC SET) white balance
function
White balance adjustment can be carried out to compensate for
the type of lighting (daylight, incandescent lighting, etc.).
Depending on the lighting conditions, true colours may not
always be obtained.
Zoom function
The filming range can be set using the zoom function.
Wide angle zoom
Telephoto zoom
Backlight compensation function (BLC)
The backlight compensation is used when the background is
bright and the subject comes out too dark.
Without backlight
compensation
Electronic shutter function
The shutter speed can be set according to the filming conditions.
4 different speed settings can be set.
Focus function
The focus can be set automatically or manually.
7
Preset position No. 1
With backlight
compensation
Advertisement
Table of Contents
