Yaesu FTM-3100R Advanced Manual page 30

Menu Selection Details
28 RPT ARS
Function: Activates/Deactivates the Automatic Repeater Shift feature..
Available Values: ON / OFF
Default: ON
29 RPT FREQ
Function: Sets the magnitude of the Repeater Shift.
Available Values: 0.00 - 150.00 MHz
Default: 0.60 MHz
30 RPT SFT
Function: Sets the Repeater Shift direction.
Available Values: - RPT / + RPT / SIMPLEX
Default: SIMPLEX
31 SCAN RSM
Function: Selects the Scan Resume mode.
Available Values: BUSY / HOLD / 2.0 SEC - 10.0 SEC (0.5 SEC step)
Default: 5.0 SEC
BUSY:
HOLD:
2.0 SEC - 10.0 SEC: The scanner will hold for the selected resume time, then resume
32 SCAN SKP
Function: Selects the Memory Scan mode.
Available Values: SKIP/SELECT/OFF
Default: OFF
SKIP: The scanner will "skip" the flagged channels during scanning.
SELECT: The scanner will only scan channels that are flagged (Preferential Scan List).
OFF: All memory channels will be scanned (the "flag" will be ignored).
33 SQL EXP
Function: Enables/Disables the split CTCSS/DCS coding.
Available Values: ON / OFF
Default: OFF
When this Set Mode Item is set to "ON", the following additional parameters are available
after the "PAGER" parameter when configuring Set Mode Item "34 SQL TYPE":
D CODE: DCS Encode only.
T DCS: Encodes a CTCSS tone and Decodes a DCS code.
D TONE: Encodes a DCS code and Decodes a CTCSS tone.
30
The scanner will hold until the signal disappears, then will resume
when the carrier drops.
The scanner will stop when a signal is received, and will not restart.
scanning, whether or not the other station is still transmitting.
FTM-3100R Advance Manual