Installation Setting & Functions; The Personalisation Menu; Automatic Air Purge Function - CHAFFOTEAUX TALIA Product Manual

3.7 INSTALLATION SETTING & FUNCTIONS
3.7.1

The personalisation Menu

The boiler can start & work without any setting.
The menu gives the installer the opportunity to personalise every installation (external storage, monozone,
multizone, solar ...) as preferred.
Installer
Technical
service
3.7.2

Automatic air purge function

A special function to purge the residual air inside the primary circuit
after a filling cycle or an intervention on the heating circuit with the
following advantages:
Less noise inside of the heating system and radiators
Fast installation phase
No air inside the heating circuit
Good condition working
This function can be activated by the installer by pressing of "Esc"
key for 5 sec continues till to the finish (about 6' ) or pressing of
"Esc" key) digits shows : P1
The aim is to help to purge the residual air inside
the primary circuit after a filling cycle. At the
activation the following cycle is begun and can
be repeated several times, till the boiler and the
heating system are completely purged from air.
Page. 36 of 63
0
End user •
2
3
4
5
6
8
Language, days and time settings
Timer program
Boiler parameters
Solar and storage
Zone 1 parameters : Heating
Zone 1 parameters : Heating
Test and utility
After sales service parameters
Chrono
functions
Installation
personalization
Parameter
check