Dhw Comfort; Dhw Performances & Certification; The Msc System - CHAFFOTEAUX TALIA Product Manual

2.6 DHW COMFORT

2.6.1 DHW performances & certification
The hot water production represents the most important value for any boiler and the TALIA has achieved
successfully the best level according to EN13203 – part 1 (performance of DHW delivery) in terms of:
•
SPECIFIC RATE
•
TEMPERATURE STABILITY
•
NO WAITING TIME
•
MINIMUM NOMINAL WATER FLOW RATE
TALIA satisfies not only the EN13203-part1.
It take into consideration also the need of the end user in terms of saving according to EN13203-part 2, with
the following checks:
•
ENERGY CONSUMPTION IN STAND BY MODE
•
ENERGY RECOVERED BY THE USEFUL WATER
•
GAS ENERGY
•
ELECTRICAL ENERGY
•
AUXILIARY ENERGY COSUMPTION WITH THE OFF MODE.
2.6.2

The MSC system

The new system MSC (Multi Modulation Sanitary
Control), bring the best answer in term of DHW
waiting time, temperature stability even with fast,
successive tapping or with small water flow
demand. This is the most severe test for a boiler.
The new system MSC guaranties moreover the optimization of the
boiler management thanks to his progressive intelligence and the new
flow sensor with turbine is able to adapt instantaneously the boiler
output according to efficiency needed minimizing the consumption
The turbo sensor advantages:
perfect gas power adaptation to the DHW flow rate
DHW regulation more sensitive
very quick answer time
low overheating or downheating during transient water flow rate
Not sensitive to hammer shock
Repeatability
Save time and energy
30 signals/second transmits by the turbine sensor to the microprocessor
Provides immediately hot water even at reduce flow rates
Page. 14 of 63