Panel Menus; Ppds Emulation; Factory Defaults - Oki MB 780 Service Manual

Panel Menus

To change the Panel Menus setting:
•
Select Panel Menus from the Configuration Menu
•
The panel displays the setting's name in the header and ◄ [
below the header row. Select ◄ or ► to change the setting. The selections are
"On" and "Off". The default is "On".
•
Select "Submit" to save your change. Select "Back" to exit without changing
value.

PPDS Emulation

This menu item allows the user to enable or disable PPDS emulation data stream.
When this setting is enabled, the following settings are also changed:
•
SmartSwitch settings for each port are turned off.
•
The printer language is changed to PPDS Emulation.
Users can still switch languages on the operator panel and through the PJL data stream.
To change the PPDS Emulation setting:
•
Select PPDS Emulation from the Configuration Menu.
•
The panel displays the setting's name in the header and ◄ [
below the header row. Select ◄ or ► to change the setting. The selections are
"On" and "Off". The default is "Off".
•
Select "Submit" to save your change. Select "Back" to exit without changing
value.

Factory Defaults

This setting enables a user to restore all the printer settings to the original factory settings.
Selections are Restore Base, Restore STD NET, or Restore LES. Restore LES enables
you to remove all Lexmark Embedded Solutions applications (LES).
Network does not appear unless you have a network printer. The following settings are
not changed:
•
Display language
•
Settings in the NETWORK/PORTS MENU group
To reset factory defaults:
•
Select Factory Defaults from the Configuration Menu.
•
Select either Restore Base, Restore STD NET, or Restore LES.
Note: There is no confirmation, and selecting one of these settings immediately takes
effect. The MFP restarts and returns to Ready state. Restoring Factory Defaults and then
Resetting the Device are displayed.
34
] ►
CURRENT VALUE
] ►
CURRENT VALUE