Grandstream Networks GVC3202 Quick Installation Manual page 7

6. Insert your SD card into the SD card slot. The recording files will be saved in
SD card.
7. (Optional) Connect presentation device (e.g., a laptop) to the GVC3202 HDMI
IN port or VGA IN port for presentation purpose during conference call.
8. (Optional) Connect USB accessory (e.g., mouse, keyboard, USB flash drive and
etc) to the USB port.
Connecting example:
Connect the external speaker-
phone to GVC3202 SPKR port.
Use the USB extension cable in
the package if necessary.
Connect HDMI cable
from GVC3202 HDMI
IN port to laptop's
HDMI port. This is for
presentation.
Connect HDMI cable from the
GVC3202 HDMI OUT port 1 to
TV's HDMI port.
Note:
For more information about how to install and connect the GVC3202, please visit
the GVC3202 product web page from http://www.grandstream.com/support
9
Connect Ethernet cable
from GVC3202 LAN
port to hub/switch/router
(LAN side).
12V DC power
adapter is
connected into
outlet.
USING THE GVC3202 REMOTE CONTROL
Trackpad
Volume Up
Volume Down
Back
Mute/DND
OK
PIP
Standard Keypad
* / Record
Send / Answer / Add
Party Into Conference
Backspace
1. Open the battery cover on the back of the remote control. Place two AAA
batteries proprely and put the cover back on.
2. When using the GVC3202 for the first time, the remote control should be paired
and connected to it via Bluetooth already. After the GVC3202 fully boots up, tap
on the OK button on the remote control to initiate the connection. Then the
remote control can be used normally.
If the remote control is not paired with the GVC3202 anymore (e.g., a factory reset
is made), follow the steps below to pair and connect the remote control:
1. Connect a USB mouse to the GVC3202 USB port. Or, log in the GVC3202 web
UI and click on "Remote Control" on the upper right corner to bring up the
virtual remote control.
2. Use the USB mouse or the virtual remote control to navigate to the idle screen
Menu->Settings->Network->Bluetooth on the TV.
3. Select and click on "Search for devices".
4. On the remote control, press OK button and number 5 button at the same time
for about 4 seconds. This will initiate pairing process on the remote control.
Home
Zoom In
Zoom Out
Menu
Camera
Navigation Keys:
Up / Down / Left / Right
Presentation
Shortcut Keys:
Red / Yellow / Blue
# / Information
End Call / Remove
Party From Conference
Power ON / OFF
10