Grandstream Networks HT503 User Manual page 47

Authenticate Conf File
Firmware Key
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
ACS URL
ACS Username
ACS Password
Periodic Inform
Enable
Periodic Inform
Interval
Connection Request
Username
Connection Request
Password
Connection Request
Port
CPE SSL Certificate
CPE SSL Private Key
Boot up", "Check New Firmware only when F/W pre/suffix changes", and
"Always Skip the Firmware Check".
This protects the configuration from an unauthorized change. If set to "Yes,
the configuration file is authenticated before acceptance.
Key for firmware encryption. (32 digits in hexadecimal format. End users
should keep it blank.
The user specify SSL certificate used for SIP over TLS in X.509 format.
The user specify SSL private key used for SIP over TLS in X.509 format.
User specify password to protect the private key above.
User specify the Auto Configuration Server's URL (TR-069 protocol)
User specify the ACS Username
User specify the ACS password
Default is No. If set to YES, device will send inform packets to the ACS
Frequency that the inform packets will be sent out to the ACS
Set a user name for the ACS to connect to this device
Set a password for the ACS to connect to this device
Set a port number for the ACS to connect to this device, default is 7547
Configure the SSL authentication of Customer-premises equipment
Configure the SSL Private Key of Customer-premises equipment
HT503 User Manual
P a g e | 46