Honeywell ADEMCO Vista-12 Series User Manual page 12

To enter a
follow-me
phone
number
– 12 –
• User code + [#] + [6] [1]
• The current follow-me phone number (if one exists) for the user's partition is displayed:
FM Phone No.
18009216704--_
• Press [∗] to clear the number.
• Enter the desired phone number. The number is automatically associated with the
partition in which it is entered.
To include a 2-second pause in the number, press [#] at the point in the entry the
pause is desired (it displays as "–"). Pauses entered at the end of the number will
allow dialing but will delay the tones by the amount of pause programmed.
If no number is desired, leave the entry blank and go to the next step.
• Press [∗] to save the new number.
The following prompt appears:
FM Repeat
1-7
• Enter the number of times, 1-7, the tones should be repeated during the follow-me
phone call.
1