Removing The Source Unit; Trim Ring Installation - Clarion CZ501E Owner's Manual & Installation Manual

Table of Contents

Advertisement

Method B
Mounting Frame
1. Insert this unit directly to the opening of
the dashboard.
2. Place M5×6 cylindrical screw through the
holes of the mounting frame located inside
the opening to holes of the unit and fasten
the screws to left & right.

Trim ring installation

Attach the trim ring around the front panel.
Downloaded from Caradio-Manual.com Manuals
27
M5x6
Dashboard

6) Removing the Source Unit

Disassemble trim ring
1. Push the trim ring to right and pull out the
right part.
2. Push the trim ring to left and pull out the
left part.
Disassemble the unit
1. Switch off the power.
2. Remove the panel.
3. Remove the trim ring.
4. Insert the removal keys straight back until
they lock, then pull the unit out.
5. Disconnect all the wires.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cz501erCz501eg

Table of Contents