Internal Jumper Settings - ALLEN & HEATH GR3 Installation & User Manual

CAUTION

7.2 Internal Jumper Settings

FUSE TYPE
CAUTION
T 3.15A 20mm
T 5.0A 20mm
Please ensure that unit is switched off before changing any jumper settings
SERIAL No:
Made in the UK by ALLEN & HEATH
necessary precautions have been taken prior to removal of cover. If in doubt call an experienced
AC MAINS IN ~
WARNING - THIS APPARATUS MUST BE EARTHED.
FUSE TYPE AC SUPPLY
T 3.15A 20mm 220 - 240V~
CAUTION - HOT SURFACE, AVOID CONTACT.
engineer.
T 5.0A 20mm 100 - 120V~
NO USER SERVICEABLE PARTS INSIDE
A DIVISION OF HARMAN INTERNATIONAL INDUSTRIES Ltd.
SERIAL No:
Made in the UK by ALLEN & HEATH
WARNING - THIS APPARATUS MUST BE EARTHED.
CAUTION - HOT SURFACE, AVOID CONTACT.
Phantom Power Link
③
Jumper Function
MIC 1 High Pass Filter @ 150Hz
①
MIC 2 High Pass Filter @ 150Hz
②
ST1 A Gain
③
ST1 B Gain
④
ST2 A Gain
⑤
ST2 B Gain
⑥
Zone 1 A Gain
⑦
Zone 1 B Gain
⑧
Zone 2 A Gain
⑨
Zone 2 B Gain
⑩
Zone 1 Mono
⑪
Zone 2 Mono
⑫
GR3 User Guide
AC MAINS IN ~
AC SUPPLY
47-63Hz
320VA MAX
220 - 240V~
300W MAX
100 - 120V~
47-63Hz
320VA MAX
300W MAX
②
④ ⑤ ⑥
①
⑦ ⑪
State when Jumper fitted
Filter Inactive
Filter Inactive
+10dB of gain applied
+10dB of gain applied
+10dB of gain applied
+10dB of gain applied
-10dB Attenuation
-10dB Attenuation
-10dB Attenuation
-10dB Attenuation
Mono Mix of Zone 1
Mono Mix of Zone 2
17
.
⑧ ⑨ ⑫ ⑩
AP10573 Issue_
Ensure
1