Belling XOU250 Installation And User Instructions Manual page 10

10
CONTROLS
FUNCTION SELECTOR
The cooking mode is selected using the function selector.
The power on neon will illuminate whenever a function
is selected. The functions available are as follows,
Light Only
Fan Defrost
Conventional Oven (top and base elements)
Conventional Oven with Fan Assist (top and
base elements plus fan)
Base heat with Fan Assist
Fan Oven (rear element plus fan)
Grill
Fan Grill
THERMOSTAT
The Thermostat is used to set the desired cooking
temperature, and is used in conjunction with the function
selector. Do not set a temperature when using the oven
in light only and fan defrost modes.
Temperature is set by turning the control clockwise to
the desired setting, with a range between 50ºC and
approximately 230ºC being available
The oven indicator light will immediately come on and
remain on until the oven reaches the set temperature.
This light will then automatically go on and off during
cooking as the oven thermostat maintains the correct
temperature.
WARNING: DURING USE THE APPLIANCE BECOMES
HOT. CARE SHOULD BE TAKEN TO AVOID TOUCHING
HEATING ELEMENTS INSIDE THE OVEN.
KNOW YOUR OVEN
MINUTE MINDER
The minute minder can be set up to 60 minutes. Setting
the minute minder does not affect any oven function.
G87