Specifications - Makita HM1213C Instruction Manual

ENGLISH

SPECIFICATIONS

Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for chiselling work in concrete, brick,
stone and asphalt as well as for driving and compacting
with appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HM1213C
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Model
Overall length
Net weight
Safety class
equipment and
environmentally compatible
) : 75 dB(A)
pA
) : 95 dB(A)
WA
HM1213C
10.8 kg
END201-4
Uncertainty (K) : 2.5 dB(A)
Vibration
The vibration
determined according to EN60745-2-6:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model HM1203C
For European countries only
its
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2 dB(A)
ENE045-1
Vibration
The vibration
determined according to EN60745-2-6:
Work mode : chiseling function with side handle
ENF002-1
Vibration emission (a
Uncertainty (K) : 1.5 m/s
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Demolition Hammer
Model No./ Type: HM1213C, HM1203C
are of series production and
Conforms to the following European Directives:
ENG102-2
2000/14/EC, 98/37/EC until 28th December 2009
and then with 2006/42/EC from 29th December
2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
2
HM1203C
-1
950 - 1,900 min
576 mm
II
Wear ear protection
total value (tri-axial
) : 7.0 m/s
h,CHeq
2
) : 81 dB(A)
pA
) : 95 dB(A)
WA
Wear ear protection
total value (tri-axial
) : 15.5 m/s
h,CHeq
2
Corporation as the
9.7 kg
ENG216-1
vector sum)
2
ENG102-2
ENG216-1
vector sum)
2
ENH213-1
responsible