Sound Controls; Audio Modes (Bass/Treble/Balance/Fader/Sq) - Panasonic CQ-BT5107U Operating Instructions Manual

Sound Controls

Audio modes (Bass/Treble/Balance/Fader/SQ)

1
Push [SEL] (Select) to select the
audio mode in sequence.
(Setting Range: 0 to 40, default: 18)
(Setting Range: –12 dB to +12 dB by 2 dB,
default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
default: 0 dB)
(Setting Range: 15 levels each and 0 (center),
default: CNT)
(Setting Range: 15 levels each and 0
(center), default: CNT)
(Selectable setting:
FLAT/ROCK/POP/VOCAL, default: FLAT)
About SQ
(Sound Quality)
SQ is a function that can call up
various sound types in
accordance with your listening
music type.
SQ indicator
2
Turn [VOLUME] clockwise or counterclockwise
to change each level or select a setting.
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
(SQ)
Note : If no operation takes place for more than 5
seconds in audio mode (2 seconds in volume mode),
the display returns to the regular mode.
q : Up
w : Down
q : Increased
w : Decreased
q : Increased
w : Decreased
q : Right enhanced
w : Left enhanced
q : Front enhanced
w : Rear enhanced
Turn to select
(Refer to the below)
(FLAT) flat frequency response:
does not emphasize any part.
(default)
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
CQ-BT5107U
11