Location Of Controls; System Requirements; Hold Switch; Downloading Files - Panasonic SV-MP100V Operating Instructions Manual

Location of Controls

Microphone
Earphones jack
(3.5 mm stereo)
–MODE
Operation
lamp

HOLD switch

USB port
Display
( → below)
Turn on, off
(Press and hold)/
Play/Stop
Display
Example: MUSIC
MUSIC mode
( → page 6)
IC RECORDER
mode
( → page 7)
Example: PLAY MODE (MUSIC)
Sound graphic
( → page 8)
Playing mark
Low-power consumption display
• Power consumption is reduced by dimming the brightness of the display's
back light. You can set the time until the display changes to a low-power
consumption one. ( → page 8 "SYSTEM, BACKLIGHT")
• Press any key on the unit to cancel the low-power consumption display.
When the back light lights, perform the next operation.
HOLD switch
Button operations are ignored. It prevents:
• The unit turning on unexpectedly causing the
battery to run down.
• Interruptions to play or recording.
HOLD ON Release
(before operation)
The operation lamp lights when
using a low-power consumption
display (→below).
(back)
REC/STOP
Skip/Search
Battery lid
Volume
SYSTEM mode
( → page 8)
LEARN mode
( → page 6)
FM RADIO mode
( → page 7)
Battery indicator
( → page 1)
Play mode
( → page 8)

System Requirements

OS: Microsoft ® Windows ® 98SE, Windows
Windows 2000 Professional, Windows
®
Drive: CD-ROM Drive
• The player and USB Driver cannot be used on Microsoft
Windows 95, Windows 98, Windows NT
® ®
USB Driver:
• Operation on an upgraded OS is not guaranteed.
• Operation on an OS other than the one pre-installed is not guaranteed.
• Multi-CPU or Multi-boot environments are not supported.
• Only users having system administrator (Administrator) authority can use
this software.
Connecting to a computer and
Connection
1
Press
and hold
Turn the unit on.
(Wait until MODE
select display appears.)
2
After connection
• Windows ME, 2000, or XP: The computer automatically finds and installs
®
• Windows 98SE: Put the included CD-ROM in your disk drive, then follow the
®
instructions on the computer screen to install the driver.
The player appears in My Computer or Explorer as a removable disk or device.
Downloading MP3 and WMA
1. In My Computer or Explorer, open the player's folder (removable disk
or device).
2. Open the PLAYER folder.
3. Copy and paste or drag and drop the MP3/WMA files from your
computer's folder into the PLAYER folder.
• "DOWNLOAD" appears on the player's display. When downloading is
completed, "USB CONNECT" re-appears.
4. Disconnect the USB cable if instructed to do so in the PC's operating
instructions.
• You can first put files into a new folder and then put that folder into the
PLAYER folder. The folders are treated as sublists by the player and the
names appear when you select play lists.
• The first 20 characters of a file name you create on a computer are
Note
displayed on this unit.
• There are some characters which cannot be displayed due to an
embedded font data limitation.
• Supports MP3 ID3 V1 tags, ID3 V2 tags and WMA tags.
• If there are no ID3 tags, the display shows the "filename.mp3".
• You cannot play MP3/WMA files that are in the player through the
computer.
• Ensure the USB cable is kept as straight as possible. Bending it too
much may cause an accident.
• Operation cannot be guaranteed if you use a USB hub or extension
cable.
• ID3 tags will not be displayed correctly if the language of the ID3
tag recorded for the MP3 is different from the language setting for
this unit.
• Compatible with WMA (DRM).
• The player will turn off when downloading is completed.
5
® Me,
XP Home Edition/Professional
®
® Windows
and Macintosh .
® ®

downloading files

Small end to
player, large
end to PC
3
Insert so the arrow is
facing upwards.
the driver for the player.
® 3.1,
4
To USB
port