Bluetooth ® - Hands-Free Phone; Switching Between The Private Mode And Hands; Phone Answering; Phone Hanging Up - Panasonic CQ-BT5107U Operating Instructions Manual

Bluetooth

Phone answering

Press [PHONE] during a call incoming.
The Bluetooth ® indicator ( ) blinks during a call
incoming/making a call.
Notes :
¡
During a call incoming, the volume of this unit
automatically switches to 18, it restores to the
original volume setting when phone answering or
call rejecting.
¡
If the automatic answering function is activated,
conversation can be automatically started after
receiving a call. (Refer to the below.)

Phone hanging up

Press [PHONE] during a call.
[VOLUME]
(SEL)

Incoming call rejection

Hold down [PHONE] for more than 2 seconds
during a call incoming.

Outgoing call termination

Hold down [PHONE] for more than 2 seconds
during making a call. (When other party does
not answer the call.)

Setting of automatic answering function

Hold down [PHONE] for more than 2 seconds
at the standby state.
The automatic answering function toggles between
ON and OFF every time [PHONE] is held down for
more than 2 seconds.
(Automatic answering deactivated)
(Automatic answering activated)
18
CQ-BT5107U
® - Hands-Free Phone
Switching between the private mode*
and hands-free mode
Press [BAND] during a call.
The private mode and hands-free mode switch
alternately every time [BAND] is pressed.
* The private mode is defined as the mode where
conversation is conducted with the mobile phone
in a usual manner without the hands-free function.

Use of voice dial

1
Hold down [d] for more than 2 seconds at
the standby state.
2
Pronounce the name registered on the
telephone directory.
If the name matches with a piece of data on the
telephone directory registered with the mobile
phone, the telephone number of the name is
dialed.
Note : The Bluetooth
® mobile phone itself must be
equipped and support voice dial function.
(Private mode)
(Hands-free mode)