Toyota 4runner 2009 Owner's Manual page 409

4RUNNER_U.book Page 413 Wednesday, July 30, 2008 3:00 PM
Fuse
16 ACC
17 CIG
18 POWER
After a fuse is replaced
n
l If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (→P. 415)
If the replaced fuse blows again, have the vehicle inspected by your
l
Toyota dealer.
n If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
n To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
l Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
l Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
l Do not modify the fuse or the fuse box.
4RUNNER_U_(L/O_0808)
4-3. Do-it-yourself maintenance
Ampere
Power outlets, outside rear view
mirrors, audio system, navigation
7.5 A system, shift lock control system,
instrument panel lights, rear seat
entertainment system
10 A No circuit
30 A Power windows, electric moon roof
Circuit
413
4