Toyota 4runner 2009 Owner's Manual page 343

4RUNNER_U.book Page 346 Wednesday, July 30, 2008 3:00 PM
3-6. Other interior features
Repeat the steps above to program another device for each of
the remaining HomeLink
346
4RUNNER_U_(L/O_0808)
Press and hold down one of the
buttons on the HomeLink
the button on the transmitter.
When the indicator
®
HomeLink changes from a slow
to a rapid flash after 20 seconds,
you can release both buttons.
Test the operation
®
HomeLink by
newly programmed button.
If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate,
see if your garage transmitter is
of the Rolling Code type. Press
and hold the
®
HomeLink button. The garage
door has the rolling code feature
if the indicator
®
HomeLink ) flashes rapidly for 2
seconds and then remains lit. If
your transmitter is the Rolling
Code type, proceed to the head-
ing "Programming a rolling code
system".
®
buttons.
®
and
on the
of the
pressing the
programmed
(on the